---
title: "Tarmac to Resin Driveway Conversion in Brentwood"
description: "Convert your tarmac driveway to resin bound. We assess the base, remove tarmac, and install new resin surface."
canonical: "https://www.brentwoodresindriveways.co.uk/services/tarmac-resin-conversion"
lastmod: "2026-11-15T10:00:11.781Z"
---

# Tarmac to Resin Driveway Conversion in Brentwood

![A resin-bound driveway entrance with wooden gates, stone pillars, and meticulously landscaped gardens.](https://utmost-ibex-736.convex.cloud/api/storage/f77e2776-db88-405a-a0ba-71ecaeb89983)

A cleaner, permeable finish over your existing tarmac, without the disruption of a full dig-out.

- **Base Assessed First**: Suitability is confirmed at survey before any price is given.
- **Itemised Quote**: Excavation, sub-base, edging and resin finish quoted as separate lines.
- **SuDS Compliant**: Permeable resin bound finish meets permitted development drainage rules.

## Where tarmac-to-resin conversions fail, and how to avoid it

The finish is only as good as the decisions made before the resin is mixed.

- **Skipped Base Check**: Laying resin over tarmac with soft patches or movement cracks means the overlay will delaminate within months.
  **Stability Inspection First**: A base stability inspection confirms whether the tarmac can carry an overlay before any surface price is agreed.
- **Unfilled Cracks**: Cracks left unrepaired before the bonding layer is applied will telegraph through the finished resin surface above.
  **Crack Repair & Levelling**: Each crack is filled and levelled flush so the resin bound layer sits on a continuous, even surface.
- **Poor Drainage Falls**: A resin overlay on tarmac with incorrect falls traps standing water at the surface edge or against the property.
  **Drainage Fall Verified**: The drainage fall is checked and confirmed before laying begins, keeping the work SuDS-compliant for front driveways.
- **No Edge Agreement**: Edge lines and aggregate colour chosen on the day often clash with the property’s existing stonework or brickwork.
  **Edge & Colour Agreed Early**: Edging detail and stone aggregate selection are confirmed before laying starts, not decided at the last moment.

## What the conversion covers

Each stage of the conversion is scoped and quoted separately, from base assessment through to the finished edge line.

- **Tarmac Base Assessment**: A structural check of the existing surface, stability, drainage fall, and crack mapping, before any overlay decision is made.
- **Surface Preparation & Crack Repair**: Loose patches are stabilised, cracks filled and levelled, and the tarmac cleaned and primed ready for the bonding layer.
- **Resin Bound Aggregate Overlay**: UV-stable polyurethane resin mixed with natural stone aggregate and trowelled flat over the prepared tarmac base.
- **Edging & Joint Line Treatment**: New edging is installed where needed and joint lines are treated to give the finished driveway a clean, defined border.

- **Permeable SuDS-Compliant Finish**: Surface water drains through the resin layer, no planning permission needed for most front drives.
- **Stone Aggregate Selection**: Aggregate colour and blend agreed before laying begins.
- **Itemised Quotation**: Every stage quoted as a separate line, not a single figure.

## Does the old tarmac have to come up before resin is laid?

That question is answered by the base inspection, not by a general rule about tarmac age or appearance.

Many older suburban homes in Brentwood have original tarmac driveways that are fading, cracking at the edges, or showing surface wear. The first question homeowners ask is whether the tarmac needs to come up. The answer depends on the base condition, not the surface appearance. Tarmac that is structurally sound, well-compacted, and draining correctly can be overlaid with a resin bound surface. Tarmac with soft patches, significant cracking, or poor drainage falls needs removing first.

The assessment covers three areas: base stability, surface level, and drainage fall. Loose or crumbling patches are stabilised before any bonding layer is applied. Cracks are filled and levelled so they do not telegraph through the resin surface above. The drainage fall is checked to confirm surface water will run clear of the finished driveway. Once the tarmac passes those checks, it is cleaned, primed, and the stone aggregate and resin bound layer are applied over it.

Edge detailing and any new edging installation are included in the conversion scope. The permeable resin bound finish drains surface water through the layer, which keeps the work within SuDS-compliant permitted development for most front driveways. Brentwood’s established residential streets mean kerb appeal is a practical concern, the finished edge line and surface colour blend are agreed before laying begins, not selected on the day.

[Start Your Enquiry](https://www.brentwoodresindriveways.co.uk/contact)

## Why choose us for your tarmac-to-resin conversion in Brentwood?

Every conversion is assessed and quoted on its own merits, no assumptions made about what the base can carry.

- **Survey Before Any Price**: A base stability inspection is arranged before a quote is given, so the price reflects the actual condition of your tarmac.
- **Itemised Quotation Every Time**: Excavation, sub-base, edge restraints, and resin bound finish are quoted as separate lines, not bundled into one figure.
- **Assessed On Site**: We schedule assessments for Brentwood homeowners covering residential driveways in this area.
- **Honest Removal Advice**: If the tarmac cannot carry an overlay, that is confirmed at survey, not discovered after the resin has been mixed.
- **SuDS-Compliant by Default**: The permeable resin bound finish meets drainage rules for front driveways under permitted development in most cases.

## From first enquiry to finished driveway

1. **Describe Your Driveway**: Tell us the area size, what is down there now, and how it currently drains. We schedule an assessment of the base.
2. **Receive Your Survey & Quote**: The assessment inspects the tarmac for stability, cracks, and drainage fall, then provides an itemised quote for every stage.
3. **Conversion & Handover**: Preparation, overlay installation, and edge detailing are completed in sequence, and the finished surface is handed over cure-ready.

[Start Your Enquiry](https://www.brentwoodresindriveways.co.uk/contact)

## Typical Tarmac To Resin Driveway Conversion Prices

| Job | Typical cost |
| --- | --- |
| Small conversion | £2,000-£3,000 |
| Single driveway conversion | £3,000-£4,500 |
| Average two-car conversion | £4,500-£7,000 |
| Large conversion | £7,000-£10,000 |

These prices are estimates and often vary with the condition, size and scope of each job. Message us for a free, no-obligation quote.

[See all prices](https://www.brentwoodresindriveways.co.uk/pricing)

## Questions about converting tarmac to resin

### Can resin be laid over my old tarmac driveway?

Yes, resin bound surfacing can be laid directly over existing tarmac, provided the base is structurally sound. The tarmac must be firm, firmly bonded, and free from significant movement or delamination. Where those conditions are met, overlaying avoids the cost and disruption of a full dig-out.

### Do I need to take up the old tarmac first?

Not always. If the tarmac is stable and firmly bonded to its sub-base, the resin can go straight over it. Removal becomes necessary when the tarmac is lifting, crumbling, or sitting on an inadequate sub-base that would cause the new surface to fail.

### How do I know if my tarmac is suitable to go over?

A site assessment checks for three things: structural integrity, surface adhesion, and drainage levels. Tarmac that is firm underfoot, shows no delamination, and sits at the right height relative to edgings and thresholds is generally a good candidate. This is assessed before any work is quoted.

### Will cracks or movement in the tarmac show through the new resin surface?

Yes, if cracks are left unaddressed they can reflect through the resin layer over time. Minor hairline cracks are filled and stabilised before the resin is applied. Wider cracks or areas showing movement need more substantial repair first, otherwise the new surface will follow the same fault lines.

### What preparation is needed before the resin is laid?

The tarmac is cleaned, any loose or delaminated sections are cut out and made good, cracks are filled, and the surface is checked for level. Edge restraints are confirmed or installed before the resin bound mix is applied and screeded to a consistent depth across the whole area.

### Is it better to repair the tarmac instead of converting it to resin?

Patching tarmac is cheaper short-term but rarely addresses the underlying cause of deterioration. Resin conversion gives a new wearing surface with better drainage and a longer service life. If the tarmac base is still sound, conversion is often more cost-effective over ten years than repeated patch repairs.

### Should I patch the tarmac, resurface it, or convert it to resin?

Patching suits isolated damage on an otherwise sound surface. Resurfacing with fresh tarmac resets the wearing course but keeps the same material. Resin conversion makes sense when you want a permeable, low-maintenance finish and the existing base is solid enough to build on. [Driveway Resurfacing](https://www.brentwoodresindriveways.co.uk/services/driveway-resurfacing) covers the resurfacing option in more detail.

### Will this work on part of my driveway, or does the whole thing need doing?

Partial conversions are possible where the tarmac condition varies across the drive. The treated section needs a defined edge restraint so the resin terminates cleanly. A partial job can look intentional if the boundary is planned carefully, though a full conversion gives a more uniform finish.

### Which areas do you cover for Tarmac to Resin Driveway Conversion?

We cover Tarmac to Resin Driveway Conversion in and around Brentwood, including Shenfield, Hutton, Ingatestone, Billericay, Mountnessing, Stock, Doddinghurst and West Horndon. If your area isn’t listed, [send us a quick message](https://www.brentwoodresindriveways.co.uk/contact) to check.

## Tell Us About Your Driveway

Describe the area, what is down there now, and how it drains. We’ll schedule an assessment of the base and quote every stage separately.

[Start Your Enquiry](https://www.brentwoodresindriveways.co.uk/contact)

## Business details

### Contact

- **Email**: [contact@brentwoodresindriveways.co.uk](mailto:contact@brentwoodresindriveways.co.uk)
- **Based in**: Brentwood, Essex, CM14
- **Enquiries**: [Send an enquiry](https://www.brentwoodresindriveways.co.uk/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00
