---
title: "New Build Driveway Installation in Brentwood"
description: "Resin driveway for new build properties. Excavation, sub-base, edge restraints, and the resin bound finish are all covered."
canonical: "https://www.brentwoodresindriveways.co.uk/services/new-build-driveway-installation"
lastmod: "2026-11-15T10:00:11.781Z"
---

# New Build Driveway Installation in Brentwood

![A newly installed resin-bound driveway with curved block paving edging leading to a modern brick house with manicured front garden and steps.](https://utmost-ibex-736.convex.cloud/api/storage/a04ba37d-52e4-4baf-afa8-d3ec51d6d99e)

Get the permissions, width, and drainage right before the surface goes down, no costly rework later.

- **Itemised Quote**: Excavation, sub-base, edge restraints and resin finish quoted as separate lines.
- **Permeable Surface**: Resin bound finish satisfies permitted development rules for most frontages.
- **Dropped Kerb Coordination**: Brentwood Borough Council application handled before surfacing begins.
- **Essex Clay Sub-Base**: Sub-base depth confirmed on site to suit local ground conditions.

## Where new build driveways fail, and how to avoid it

The most common problems come from skipping the planning stage, not the laying stage.

- **Shallow Sub-Base**: Essex clay moves seasonally; a sub-base under 150mm on uncompacted fill will crack the surface within two winters.
  **Site-Confirmed Depth**: Sub-base specification is set at survey based on actual ground conditions, not a standard depth applied to every plot.
- **Impermeable Surface**: An impermeable front driveway over 5 square metres requires a planning application, many homeowners only discover this after laying.
  **Resin Bound Finish**: A resin bound permeable surface satisfies permitted development rules for most frontages, removing the need for a planning application.
- **No Dropped Kerb**: Driving over the pavement without a dropped kerb is a highways offence; the application must be approved before surfacing starts.
  **Council Coordination**: The dropped kerb application to Brentwood Borough Council is arranged and confirmed before any groundwork begins on site.
- **Cramped Frontage**: Narrow new build plots are common across Essex estates; a driveway under 2.4 metres wide makes daily parking difficult and door access awkward.
  **Width-First Planning**: The frontage is measured for a practical parking width, typically 2.4 to 3 metres minimum, before any surface or edging is specified.

## What a new build driveway installation covers

From the dropped kerb application through to the finished resin bound surface, each stage is quoted as a separate line item.

- **Dropped Kerb Application & Coordination**: Brentwood Borough Council application arranged before groundwork starts, so vehicle access across the pavement is lawful from day one.
- **Ground Levelling & Sub-Base Preparation**: Excavation depth and MOT Type 1 sub-base compaction are confirmed on site, accounting for Essex clay movement and new build fill conditions.
- **Edging & Kerb Installation**: Edge restraints are set to define the driveway boundary and hold the resin bound surface in place along every edge.
- **Permeable Resin Bound Surface**: UV-stable polyurethane resin mixed with natural aggregate, trowelled flat and left to cure, stones locked in, surface drains freely.
- **Surface Drainage & Water Runoff Control**: Surface fall is set during installation to direct residual water away from the property and satisfy SuDS requirements without a separate soakaway.

- **Front Garden Parking Conversion**: Full conversion from lawn or border to driveway.
- **Single or Double Bay Layout**: Sized for one or two cars with door-opening clearance.
- **Permeable Surface Planning Advice**: Guidance on which surface avoids a planning application.
- **Itemised Quotation**: Every stage priced separately before work begins.

## Planning, drainage, and sizing for a new build driveway

Getting the permissions, width, and drainage right at the start avoids costly changes once the surface is down.

A new build driveway involves more upfront decisions than a replacement. The frontage needs measuring for a practical parking width, typically 2.4 to 3 metres minimum for a single car, and the dropped kerb application to Brentwood Borough Council needs to be in place before any surfacing work begins. Permitted development rules allow a new front driveway without planning permission provided the surface is permeable or surface water is directed to a lawn or border, not the public road.

Sub-base depth and compaction are critical on new build plots. Essex clay soil conditions mean the ground beneath a new driveway can move seasonally, and a sub-base that is too shallow or poorly compacted will cause the surface to crack or settle unevenly. The sub-base specification is confirmed at survey based on the ground conditions found on site, not a standard depth applied to every job.

The permeable resin bound finish drains surface water through the surface layer and into the sub-base below, satisfying SuDS requirements without the need for a separate soakaway in most cases. Surface fall is set during installation to direct any residual water away from the property. The quote covers dropped kerb coordination, sub-base preparation, edging, and resin bound finish as separate line items so the full scope is clear before work starts.

[Start Your Enquiry](https://www.brentwoodresindriveways.co.uk/contact)

## Why Resin Driveways Brentwood for a new build installation

A new build frontage has specific planning, drainage, and ground conditions that need the right process from the first visit.

- **Itemised Quotation at Every Stage**: Excavation, sub-base, edge restraints and resin finish are each priced separately, no single combined figure to query later.
- **Dropped Kerb Application Handled**: The Brentwood Borough Council application is coordinated before groundwork starts, so no stage is delayed by a missing approval.
- **Permitted Development Compliance**: The resin bound surface specified meets the permeable surface requirement, keeping most frontages within permitted development rules.
- **Ground Conditions Assessed on Site**: Sub-base depth is confirmed at survey for each plot, Essex clay conditions vary, and a site visit sets the right specification.
- **Assessed Before Any Quote**: Every enquiry gets an assessment covering new build frontages across Brentwood and the surrounding area.

## From enquiry to finished driveway in three steps

1. **Submit Your Enquiry**: Describe the frontage size, what is there now, and how it currently drains so the right specialist can be arranged for your plot.
2. **Survey & Itemised Quote**: An on-site visit measures the frontage, assesses ground conditions, and quotes excavation, sub-base, edging and surface as separate lines.
3. **Installation & Handover**: Groundwork, sub-base compaction, edging, and resin bound finish are completed in sequence, with surface fall set and cure time confirmed before handover.

[Start Your Enquiry](https://www.brentwoodresindriveways.co.uk/contact)

## Typical New Build Driveway Installation Prices

| Job | Typical cost |
| --- | --- |
| Small new build driveway | £3,000-£4,500 |
| Average new build driveway | £4,500-£7,500 |
| Large new build driveway | £7,500-£12,000 |
| New build with full groundwork | £10,000-£15,000 |

These prices are estimates and often vary with the condition, size and scope of each job. Message us for a free, no-obligation quote.

[See all prices](https://www.brentwoodresindriveways.co.uk/pricing)

## Questions about new build driveway installation in Brentwood

### Do I need council permission for a new driveway at my home?

Usually no, but it depends on the surface you choose. Permitted development rules allow a new driveway without planning permission if the surface is permeable, or if rainwater drains to a lawn or border rather than the road. Impermeable surfaces over 5 square metres do require permission. A resin bound finish is classed as permeable, so it typically avoids that requirement.

### Does a resin driveway need planning permission?

No, in most cases. Resin bound surfacing is porous, so rainwater drains through the surface rather than running off into the street. That means it meets the permitted development rules that exempt permeable driveways from planning permission. If your property is listed or in a designated area, check with your local planning authority first.

### Will my new driveway need to be permeable or drain properly?

Yes, if the driveway covers more than 5 square metres and drains onto the public highway. Permitted development rules introduced in 2008 require front garden driveways to manage surface water on site. Resin bound surfacing is fully permeable, allowing water to pass through to a correctly prepared sub-base below, which satisfies this requirement without additional drainage channels.

### How much space do I need for the cars I want to park on it?

A single car needs roughly 2.4 metres wide by 4.8 metres long as a minimum. For comfortable opening of doors and easy manoeuvring, 3 metres wide is more practical. A double driveway needs at least 4.8 metres of width. These dimensions should be confirmed during the site survey so the layout suits your specific vehicles and access angle.

### Will this driveway layout actually fit the front of my property?

That is confirmed during a site survey before any work begins. The surveyor checks the available width between boundaries, the dropped kerb position, any utility covers, and the gradient of the plot. If the space is tight, the layout can be adjusted, for example, angling the parking bay or using a turning area, to make the most of what is there.

### What is the cheapest option for a new driveway?

Gravel has the lowest upfront cost, but it scatters, requires edging, and needs topping up over time. Tarmac sits in the mid-range for installation cost but can crack and stain. Resin bound surfacing costs more initially, yet its durability and low maintenance mean the long-term cost is often comparable. The cheapest option at installation is not always the cheapest over ten years.

### How much does it cost to install a new driveway in the UK?

Guide prices run from £3,000-£4,500 (Small new build driveway) to £10,000-£15,000 (New build with full groundwork). Quotes are itemised to show excavation, sub-base, edge restraints, and the resin finish as separate costs, so you can see where the budget goes.

### What affects the cost of a new driveway?

The main factors are the total area, the depth of excavation required, the condition of the ground, the type of sub-base needed, and the aggregate or finish selected. Access for machinery and the need to remove and dispose of existing materials also affect the final figure. Each element is quoted as a separate line so the breakdown is clear.

### Which areas do you cover for New Build Driveway Installation?

We cover New Build Driveway Installation in and around Brentwood, including Shenfield, Hutton, Ingatestone, Billericay, Mountnessing, Stock, Doddinghurst and West Horndon. If your area isn’t listed, [send us a quick message](https://www.brentwoodresindriveways.co.uk/contact) to check.

## Tell Us About Your Driveway

Describe the frontage size, what is there now, and how it drains. We’ll schedule an assessment of the base and quote every stage separately.

[Start Your Enquiry](https://www.brentwoodresindriveways.co.uk/contact)

## Business details

### Contact

- **Email**: [contact@brentwoodresindriveways.co.uk](mailto:contact@brentwoodresindriveways.co.uk)
- **Based in**: Brentwood, Essex, CM14
- **Enquiries**: [Send an enquiry](https://www.brentwoodresindriveways.co.uk/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00
