---
title: "Resin Driveways Services | Browse Our Installations"
description: "Browse all our resin driveway and patio services. From new installation to repair, overlay and custom design in Brentwood."
canonical: "https://www.brentwoodresindriveways.co.uk/services"
lastmod: "2026-10-05T11:46:09.632Z"
---

# Resin Driveways Services

From new driveway installations to overlays, repairs, paths, patios, and steps.

## Resin Driveways Services

From new driveway installations to overlays, repairs, paths, patios, and steps.

- **[Block Paving Removal & Resin Replacement](https://www.brentwoodresindriveways.co.uk/services/block-paving-removal-resin-replacement)**: Removing block paving exposes the sub-base condition and jointing sand layer beneath, both need assessing before resin is laid. Essex clay sub-bases can shift over time, and any soft spots or incorrect drainage falls are corrected at this stage, not after the new surface is down.
- **[Custom Resin Paving Design](https://www.brentwoodresindriveways.co.uk/services/custom-resin-paving-design)**: Custom resin paving combines aggregate colour selection, edge and border detailing, and sub-base assessment into a single design and survey process. Drainage gradient and base depth are confirmed before colour blends are finalised, a design choice that ignores the base condition will not hold its finish.
- **[Driveway Resurfacing](https://www.brentwoodresindriveways.co.uk/services/driveway-resurfacing)**: Where the existing tarmac or concrete is structurally sound, a resin bound overlay avoids the cost and disruption of a full dig-out. The base is assessed for stability, drainage falls, and surface level before any overlay is recommended, an unsound base means resurfacing will not hold.
- **[New Build Driveway Installation](https://www.brentwoodresindriveways.co.uk/services/new-build-driveway-installation)**: A new build driveway requires a dropped kerb application, a sub-base sized for Essex clay conditions, and a permeable surface to satisfy permitted development rules. Front driveways over 5 square metres surfaced with an impermeable material require a planning application, a resin bound permeable finish avoids that requirement for most frontages.
- **[Permeable Paving Installation](https://www.brentwoodresindriveways.co.uk/services/permeable-paving-installation)**: Permeable paving drains surface water through the finish layer and into a permeable sub-base below, satisfying SuDS requirements. Front driveways under 5 square metres or surfaced with a permeable material typically fall within permitted development, removing the need for a planning application under current national guidance.
- **[Resin Bound Paths & Walkways](https://www.brentwoodresindriveways.co.uk/services/resin-bound-paths-walkways)**: Resin bound paths mix 2-6mm natural stone aggregate into UV-stable polyurethane resin, producing a permeable, weed-resistant surface suited to foot traffic. The sub-base is assessed for drainage and level before laying, Essex clay soils can hold water beneath a path, and a poorly drained base causes the surface to lift.
- **[Resin Bound Patios](https://www.brentwoodresindriveways.co.uk/services/resin-bound-patios)**: Resin bound patios bond natural stone aggregate into a UV-stable resin layer, producing a flat, weed-resistant surface that drains freely. Where the existing concrete or slab base is sound, an overlay is possible, reducing groundworks cost and disruption compared with a full installation.
- **[Resin Bound Steps & Staircases](https://www.brentwoodresindriveways.co.uk/services/resin-bound-steps-staircases)**: Resin bound surfacing on outdoor steps uses a fine 1-3mm aggregate blend to produce a close-textured, slip-resistant tread. Each step is assessed for base condition and drainage before laying, a hollow or cracked substrate beneath the tread causes the resin layer to delaminate under foot traffic.
- **[Resin Driveway Installation](https://www.brentwoodresindriveways.co.uk/services/resin-driveway-installation)**: A resin driveway installation starts with a base condition inspection, confirming whether the existing surface can be overlaid or needs excavating. Excavation depth, MOT Type 1 sub-base compaction, edge restraints, and the resin bound finish are each quoted as separate line items so there are no hidden groundworks costs mid-job.
- **[Resin Driveway Repair & Restoration](https://www.brentwoodresindriveways.co.uk/services/resin-driveway-repair-restoration)**: Resin driveway repairs start with a base layer inspection to confirm whether damage is surface-level or caused by sub-base movement. Patch repairs, aggregate reseating, and surface recoating are only carried out once the base condition is confirmed, repairs applied over a failing base will lift again within months.
- **[Resin Driveways in Brentwood](https://www.brentwoodresindriveways.co.uk/)**: Resin bound surfacing locks aggregate into a UV-stable polyurethane resin layer, producing a permeable, stone-free finish. An itemised quote covers excavation, MOT Type 1 sub-base, edge restraints, and resin bound finish as separate line items, not one combined figure.
- **[Resin Overlay on Existing Surfaces](https://www.brentwoodresindriveways.co.uk/services/resin-overlay-existing-surfaces)**: Applying resin bound aggregate over an existing surface avoids full removal when the base is genuinely sound. The surface must pass a soundness check, a moisture test, and a level assessment before primer is applied, any of those failing means the overlay will delaminate under normal use.
- **[Tarmac to Resin Driveway Conversion](https://www.brentwoodresindriveways.co.uk/services/tarmac-resin-conversion)**: Converting a tarmac driveway to resin bound surfacing starts with a base stability inspection. Where the tarmac is structurally sound, crack-free, and correctly drained, a resin bound overlay avoids full excavation. Where it has failed, soft patches, significant cracking, or poor drainage falls, removal is confirmed before any surface price is given.

## Tell Us About Your Driveway

We schedule a survey of the base and provide an itemised quote, excavation, sub-base, edge restraints and resin bound finish as separate lines.

[Start Your Enquiry](https://www.brentwoodresindriveways.co.uk/contact)

## Business details

### Contact

- **Email**: [contact@brentwoodresindriveways.co.uk](mailto:contact@brentwoodresindriveways.co.uk)
- **Based in**: Brentwood, Essex, CM14
- **Enquiries**: [Send an enquiry](https://www.brentwoodresindriveways.co.uk/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00
